Electroplating Equipment in Turkey: KKDİK, Permits and Export Supply Chains
Turkey has its own chemical regime. Plan equipment around KKDİK registration, national permits and the EU-facing audit layer for export supply chains.

What the rules actually require
- KKDİK (the Turkish REACH). Registration obligations for substances above one tonne per year phase in from 2026, with implementation rules published in 2025. EU REACH registration does not satisfy KKDİK — every bath chemistry needs its Turkish status confirmed with the supplier.
- National environmental permitting. Plating shops operate under national environmental permits with discharge conditions set by the authorities and, in organized industrial zones (OSB), by the zone's infrastructure rules.
- EU-facing customer audits. Export supply chains are audited against REACH declarations, BAT-aligned evidence and customer quality standards — on top of Turkish law.
The treatment train that solves it
Stage | What it does | Equipment to specify |
|---|---|---|
1 · Segregated collection | Keeps cyanide, hex-chrome and acid streams apart so they cannot react in the drain | Separate sumps and drainage channels per stream, labelled and bunded |
2 · Cyanide oxidation | Destroys free cyanide before it reaches the metal-removal stage | Alkaline chlorination with sodium hypochlorite, ORP-controlled dosing, retention tank |
3 · Hexavalent chrome reduction | Converts Cr(VI) to Cr(III) so it can precipitate | Acidified reduction tank with bisulfite/metabisulfite dosing on ORP control |
4 · Metals precipitation | Drops dissolved metals out as hydroxide solids | pH-controlled lime or caustic dosing, polymer flocculation, flash-mix then flocculation chambers |
5 · Clarification | Separates the solids from the water | Lamella clarifier or DAF unit with sludge bleed |
6 · Polishing | Catches fines and residual metals to hold tight limits | Sand or multimedia filter, ion-exchange polishing where limits are tight |
7 · Final pH trim and monitoring | Returns the water to the permitted band and proves it | pH trim dosing, flow meter, composite sampler or online probe at the outlet |
8 · Sludge handling | Turns wet solids into a disposal-ready cake | Filter press or sludge drying bed, containment and manifest-ready storage |
Turkey-specific notes
- Write the KKDİK status of every bath chemistry into the equipment scope — the dosing and storage scope must match what can legally be supplied.
- OSB membership brings centralized infrastructure: confirm the zone's influent limits and surcharge structure before sizing your own treatment plant.
- Trivalent chromium deserves evaluation at specification time: Turkish law sits outside the EU authorisation regime, but EU-facing customers increasingly expect Cr(VI)-free supply.
Five ways compliance projects actually fail
- The pH doser that nobody maintains. Metal removal stands or falls on precipitation pH. A single dosing pump with no redundancy, no alarm and no calibration schedule is the most common cause of effluent excursions. Specify dual pumps with auto-changeover and alarm escalation.
- Streams mixed too early. Cyanide and acid streams meeting in one sump generate HCN gas; chrome and cyanide in one tank poison each other's treatment. Segregation is civil-works scope — pour the channels when you pour the floor.
- No equalization. Rack dumps create peak flows that overwhelm a clarifier sized for averages. An equalization tank at the front of the train flattens the load and shrinks the equipment downstream.
- Treatment sized for commissioning, not production. Full racks load the effluent three times harder than the commissioning run. Size for the production case, with sample data from a comparable line if possible.
- Records that live in a notebook. Inspectors, auditors and customers all ask for history. Instrumented treatment data with retention in the control system turns a stressful inspection into a file hand-over — the scope is in the controls and traceability guide.
What drives cost and timeline
Key takeaways
- KKDİK is independent of EU REACH — confirm every chemistry's Turkish registration status before specifying it.
- Design one documentation system that serves both the Turkish permit and the European customer audit.
- OSB rules add a limit layer — read them with the national permit.
- Trivalent chemistry is the export-safe default for new chrome capacity.
- Treatment reliability and records satisfy the inspector and the OEM auditor alike.
Your next five steps
- Collect KKDİK status for every planned bath chemistry from your suppliers.
- Confirm national permit conditions and OSB rules for your site in writing.
- Define the treatment train for your route's metals.
- Build dual-regime documentation (Turkish permit + EU audit) into the control scope.
- Resolve the hexavalent-to-trivalent question before ordering chemistry.



